Swap body with ALU WOOD walls and side sliding doors

Main parameters

• length 7450 mm
• height 2670 mm
• width 2550 mm
• body total capacity 16 000 kg
• UIC certificate for transport by rail under DIN 283
• floor load for forklift truck up to 5460 kg
• certificate for customs services
• certificate XL for securing goods

Floor unit

is made of bent sections of 3.5 mm thickness, St. quality of 52.2, floor structure height of 180 mm, floor plate of anti-slip waterproof plywood of thickness 24 mm, four pieces of single elements, gripping edges, four pieces of support legs - fixed or telescopic, pull-out ladder near the doors. Guide tunnel wide 600 mm is made of two closed profiles. Bumper on the front face against damage when reversing the car under the body.

Body

Side, front walls are made of ALU WOOD plates with thickness 20 mm. ALU WOOD Panels are mounted inside welded construction. Plates are glued and riveted inside steel construction. On both sides are ALU sliding door for side -loading. Roof panels are made of galvanized punched sheets of quality St. 37.2, on rear is mounted roll aluminium door. Trench sheets with a heigh of about 250 mm is at the lower edge of the body. The frame of the body is made of bent sections with a thickness of 3 and 3.5 mm, quality St. 37.2, four ventilation holes in the side walls. Steel bumpers protecting the body from damage are at the bottom of the rear portal.

Specification